Description
aicare
Serving for Home Healthcare
Fingertip Pulse oximeter
One button operation
Accurate reading
5-10S fast measurement
LED color dislay
Fastest test in 5 seconds
One-key measurement. After pressing the power button, the reading will be ready in 5-10 seconds.
Intelligent imported S0C chip algorithm
upgrade for accurate measurement
Adopt powerful intelligent SOC chip and apply LambertBeer’s law
Upgraded data processing algorithm to accurately detect blood oxygen saturation
HD color large screen
High brightness, wide viewing angle and clear display
CPU motherboard
SOC chip upgrade algorithm
Accurate measurement
Silicone light shielding layer
Anti-light interference
Large HD colour screen
Screen upgrade makes readings clearer
Not afraid of sunlight, readings are clearly visible
Spo2 blood oxygen saturation
Normal range 95%-99%
PR pulse rate
Normal range 64–100PM
Low power consumption and longer service life
With a new battery, it can be used for up to 40 hours.
Finger exit 8-second automatic shutdown to save power
Rotatable screen makes reading easier
After the measurement data is obtained, the number can be adjusted by short pressing the on key Data can be easily read in four display directions.
Silicone blackout design
Sensitive and accurate measurement
Silica gel shading layer structure optimization, using more delicate blackout design, good signal transmission quality, sensitive and accurate measurement.
Lightweight and portable
Easy to carry and test at any time
Lightweight body to fit in your pocket, whenever you want to test
Keep up to date with your physical condition
Steps to use
1.Open the back cover and insert the battery
Open the back of the battery compartment, correctly insert two 7(AAA) batteries according to the battery’s positive and negative levels, and close the back cover.
2.Hold down the tail and insert your finger
Press and hold the tail of the oximeter, the front nail compartment will open, and put your hand into the front nail compartment.
3.Press the button to start measuring
Press the power button which at the bottom of the screen to start measurement.
4.Read data at a glance
After 5-8 seconds, the large HD display screen will display the blood oxygen and pulse rate values (SPO, % is the blood oxygen concentration value, PRbpm is the pulse rate value), and the display direction can be switched by pressing the power button.
