Description:

Name:Automotive Engine Coolant Heater/Car Preheater European Plug

Material:Environmental Aluminum+Environmental PVC

Power:1500W

Applicable Voltage:220V-240V

Length*Width*Height:8cm(3.1inches)*8cm(3.1inches)*12cm(4.7inches)

Joint diameter: 17mm/0.7 inches

Weight:About 0.85KG

Automatic Temperature Control:65Celsius-70Celsius

Pump lift:Above 70cm

Service life: more than 2000 hours

Applicable vehicles:Gasoline vehicles, diesel vehicles

Features:

The heater is intended for pre-heating of internal combustion engines of vehicles and units having a liquid cooling system. Suitable for both cars and cargo avomobiles.

The cooling liquid is heated by an electric heating element and pumped by a pump builted into the preheater.

Approximate technology of separate heating, i.e. the heating element does not come into contact with the cooling liquid, but heats the special ribbed plate, which in turn heats the coolant.

Inside machine there are temperature sensors, with which the heater switches off the heater when the temperature reaches a temperature of 75 degrees, and then turns it back on at 70 degrees.

Using a new high purity aluminum, fine workmanship, reasonable structure, Seiko to create each component. Exclusive R & D patent heating body, higher thermal conductivity, more smooth cycle.

Installation and warning:

After installation, must be anti-antifreeze waterway exhaust, so as to avoid air in the antifreeze air resistance, antifreeze does not cycle lead to damage to the preheater

Natural heater can not use this preheater, the preheater can only be used for the use of high-quality glycol antifreeze vehicles, low-grade antifreeze will produce scale, rust and ice, plug the preheater.

Please use the rated voltage of 220-240 volts, 10A power socket and can carry the peak power of 16A international three-wire, and a reliable grounding protection power.