Description
433Mhz Wireless RF Universal DC 12V 8CH Receiver Remote Control Switch long distance Transmitter bedroom light lamp motor led
Technical Data Of Transmitter:
|
Button |
8buttons |
|
Material |
PVC |
|
Battery |
1pcs 23A12V(Include) |
|
Remote Range |
Up to 500m(theoretical distance) |
|
Size |
3.54*1.57 in(90*40 mm) |
|
Weight |
0.1 lb(45 g) |
|
Feature |
Has a long retractable antenna |
|
IC Chip |
2262 fixed/1527 learning |
Technical Data Of Receiver:
|
Working Voltage |
DC 12V |
|
Input/Output Power |
1-250V |
|
Channel |
8 |
|
Size |
3.8*2.8*1 in(96*71*25 mm) |
|
Weight |
0.29 lb(130 g) |
|
Max Current |
10A |
|
Feature |
With Wire Jumper |
|
RF Frequency |
433MHz |
|
Code |
1527 learning code |
|
Remote Controlled |
Almost 20pcs |
|
Feature |
Has product manual in Russian and Spanish |
Product Video On Youtube : https://youtu.be/LD4FwaiH-sk
Perfect Craft & Detail Control
Note:
1.Puerto de trabajo(рабочий порт,作業ポート)
2.Indicador de luz(световой индикатор,インジケーターライト)
3.Botón de aprendizaje(кнопка обучения,学習ボタン)
4 gorra de puente(крышка перемычки,ジャンパーキャップ)
5 relé(реле,リレー)
6 antena(антенна,アンテナ)
7.Módulo de recepción(модуль приема,受信モジュール)
Note:
A=Normal Open,B=COM,C=Normal Close
Power Supple=DC 12V
L/N=1-250V
choose different options to place an order
Wiring Diagram
operating mode
You can match the Transmitter with the Relay Receiver Module in 4 modes.
Momentary Mode:
1. Press and hold one button, relay will turn on;
2. Release the button, this relay will turn off.
Toggle Mode:
1. Press button “A”, relay will turn on;
2. Press button “A” again, this relay will turn off.
Latched mode:
1. Press button “A”, relay 1 will turn on;
2. Press button “B”, relay 2 will turn on,at the same time,relay 1 will turn off.And so on.
Mix mode:
1234 Relay will work in Momentary Mode,5678 Relay will work in Toggle Mode.
Delete the existing data about operating modes
Press and hold the learning button (on the Receiver) 5 seconds. The existing data will be deleted succeed.
Note:
1. When you receive our products, it may set in one remote mode randomly, that because each product was tested before it can be arranged to shipment. So, please delete the existing data to first use.
2. After deleted the data, all the remote controls cannot work any more.
Set up
Set up(Momentary)
1.Keep Jumper Cap Pin 1234 no connection;
2.Press the learning button(on the Receiver) once. Wait for 3 seconds;
3.Press button A on the remote control. Wait for 3 seconds. Succeed.
Set up(Toggle)
1.Connect Jumper Cap Pin 1 2;
2. Press the learning button(on the Receiver) once. Wait for 3 seconds;
3. Press button A on the remote control. Wait for 3 seconds. Succeed.
Set up(Latched)
1.Connect Jumper Cap Pin 3 4;
2. Press the learning button(on the Receiver) once. Wait for 3 seconds;
3. Press button A on the remote control. Wait for 3 seconds.Succeed.
Set up(Mix)
1.Connect Jumper Cap Pin 1&2,3&4;
2. Press the learning button(on the Receiver) once. Wait for 3 seconds;
3. Press button A on the remote control. Wait for 3 seconds.Succeed.
*If you do not understand clearly. Please send us a message to let us know. We will do our best to service each of our customers. Enjoy your shopping!*
