Foreverlily Dual Heat Wax Heater Epilator 40W Depilatory Heater Cartridge Wax Roller Base Roll On Waxing Hair Removal Machine

Specification

Item Type: Wax Heater
Material: ABS+AS
Power: 40W
Input Voltage: 110V-120V/220V-240V, 50-60Hz
Capacity: 100ml
Weight: 125g
Size: 4*7*17.5cm/1.6*2.8*6.9in

Product Include

1*Main Device
1*Power Cord(US/UK/EU/JP)
1*User Manual
1*Box

Feature

1.Simplified Operation.

Specially designed to melt roll on wax-a kind of wax that’s ultra-easy to use. Simply insert the wax into this machine, and then it can be directly used for waxing.

2.40W High Power.

Advanced heating technology is used to effectively shorten the heating time. Just wait 20 minutes, and your wax will get fully melted.

3.Dual Heat-conducting Plates.

They heat up the roll on wax from both sides, making its melting uniform and further efficient.

4.Transparent Slot.

Find it hard to control the heating time? From now on, you can see through it to check the state of the wax, and easily figure out if the wax has fully melted for use.

Operation

1.Clean skin thoroughly before waxing.
2.Insert roll on wax into the heater.
3.Connect the heater with a power supply.
4.Wait for 20-30 minutes.
5.Apply wax along the direction that hair grows.
6.Stick a depilatory paper and press it down.
7.Tear off the paper against the direction that hair grows.
8.Clean and moisturize the waxed region.

Caution

People listed below are prohibited to use the product:
(1)Children;
(2)Pregnant woman;
(3)People with sensitive skin or other skin diseases.
2.Do not expose to sunlight and ultraviolet ray within 24 hours after a wax treatment.
3.To clean the product, please cut the power first, and then use a soft cloth (it should has been soaked with a cleanser that can melt wax) to clean the remaining wax in the product. Be sure not to directly soak the product with water.
4.Keep out of reach of children.
5.Use the product only for its intended uses as described in this instruction manual.
6.If the product malfunctions or is damaged, stop using it immediately. Do not attempt to dismantle and repair it yourself. Instead, contact our customer service for replacement or technical assistance.