Description
【Product Introduction】 Temperature and humidity module RHI-112ALong-term experience in development of the humidity sensor driving circuit of dedicated module，Easy to use，And provided at a low price high-precision of humidity may。With high precision、The temperature dependence of small、 Single-chip microcomputer control and thus without correction of the temperature、The wetness detection for a wide range of characteristics。
【Electrical parameters】 Rated voltage：DC3.15～5.5V
Rated Power：0.5mA（MAX,Sine wave）
Operating temperature range：0～60℃
Humidity detection range：10～90%RH
Storage Temperature range：-20～70℃
Save humidity range：95%RHThe following（No condensation）
Humidity detection accuracy：±3%RH
【Humidity output signal】（25℃,1KHZ,1VAC）
|
Humidity%RH |
10% |
20% |
30% |
40% |
50% |
60% |
70% |
80% |
90% |
|
VoltageV |
0.33 |
0.66 |
0.99 |
1.32 |
1.65 |
1.98 |
2.31 |
2.64 |
2.97 |
【The temperature output characteristics】
|
Temperature℃ |
0 |
10 |
20 |
25 |
30 |
40 |
50 |
60 |
|
ResistanceKΩ |
27.22 |
17.93 |
12.08 |
10 |
8.315 |
5.834 |
4.161 |
3.014 |
【Humidity detection accuracy】
|
Relative humidity（%RH） |
30 |
40 |
50 |
80 |
|
Output voltage（V） |
0．99 |
1.32 |
1.65 |
2.64 |
|
Reference accuracy（%RH） |
±5 |
±4 |
±3 |
±6 |
【Standard assay conditions】
In the atmosphere，Temperature25℃，Frequency of use of1KHZ，The measured voltage1VAC(Sine wave)As a standard。
Characteristic test，The humidity sensor into25℃/0%RHThe dry air，Etc.30Minutes，The humidity was set60%RH，Wait15Minutes，Test value。Measuring device：Divided flow humidity generator：SPH-1Type（shen rong system）
【Pay attention to matters】 A．Don’t let the product condensation，Don’t let the product stained with water。
B．Not in the following gases in the environment using：Salt、Inorganic gases（Sulfur dioxide，Chlorine element， Ammonia）、Volatile organic compounds（Alcohol，Glycol ethers，Aldehydes）
C．It is best not to long-term preservation60℃The above environment，Because it is easy to make the sensor box deformation
